CC1310: CC1310 Low Power (deep sleep mode) issue

Fady Tharwat

Part Number: CC1310

Tool/software:

We are facing an issue according to the CC1310 RF chip to make it enter the (standby mode) because we need to make the power consumption as minimal as possible (0.7 uA) . Kindly find attached the point that i mentioned.

Kindly we need your support according to this case with my FW team to avoid another HW iteration of the meter.

Looking forward to your support

10 months ago

0 ZC 10 months ago

TI__Mastermind 18335 points

Hi,

Please can you clarify what your issue is (my reading is that you are potentially not measuring 0.7 uA current consumption in Standby mode) and provide more details?

You may also find the following App Notes useful:

SWRA478 (Measuring CC13xx and CC26xx Current Consumption): https://www.ti.com/lit/swra478
SPRUI18 (SimpleLink SDK Power Management: MSP432, MSP432E4, CC13xx/CC26xx, and CC32xx): https://www.ti.com/lit/sprui18

Regards,

Zack

0 Fady Tharwat 10 months ago in reply to ZC

Prodigy 10 points

no we cannot access the registers to put the chip in the standby mode, now the measurments is 1.9mA and this is too high consumption for us due to some battery applications, we used easy link library for firmware but we need to know which module or part should be modified to make cc1310 chip enter the standby mode or deep sleep mode,

regards

fady

0 ZC 10 months ago in reply to Fady Tharwat

TI__Mastermind 18335 points

Please see the pinStandby example in the SDK: https://dev.ti.com/tirex/explore/node?node=A__AP-9OkmqXEW6p5a7hRtePg__com.ti.SIMPLELINK_CC13X0_SDK__eCfARaV__LATEST

Regards,

Zack

Sub-1 GHz

Sub-1 GHz forum

CC1310: CC1310 Low Power (deep sleep mode) issue