CC1352P7: syscfg error when trying to migrate CC1352P to CC1352P7

amit dolev

Expert 1080 points

Part Number: CC1352P7
Other Parts Discussed in Thread: CC1352P, , SYSCONFIG

Tool/software:

Trying to migrate existing MP CC1352P project to CC1352P7

SimpleLink SDK : 6.10.0.29

SysConfig : 1.16.2

When I try to switch the device from CC1352P to CC1352P7 , I get the following error:

"The migration is not supported by : BLE"

7 months ago

0 Theo Lange 7 months ago

TI__Expert 7645 points

Hi Amit,

which SDK are you planning to use?

If you want to port application code from CC1352P to CC1352P7 I recommend you to start with an example project for CC1352P7 and to copy then your application code to this project.

Kind regards,
Theo

0 amit dolev 7 months ago in reply to Theo Lange

Expert 1080 points

Hi Theo,

We prefer to keep the existing SimpleLink SDK : 6.10.0.29 since the project has been in mass production for 2 years.

The new project is just a spin-off with identical HW with CC1352P7 instead CC1352P

0 Theo Lange 7 months ago in reply to amit dolev

TI__Expert 7645 points

Hi Amit,

then you can select from this SDK an example for CC1352P7 and copy then your application code to this example.
This should resolve all the errors that you are seeing.

Kind regards,
Theo

0 amit dolev 7 months ago in reply to Theo Lange

Expert 1080 points

I have resolved it by removing BLE from syscfg, switching the device from CC1352P to CC1352P7, and afterward adding back BLE support by syscfg.

It Seems like a bug on syscfg tool

Sub-1 GHz

Sub-1 GHz forum

CC1352P7: syscfg error when trying to migrate CC1352P to CC1352P7