Other Parts Discussed in Thread: MSP430F5528, UNIFLASH, MSP430FR6047, , MSP-FET
Tool/software:
I am trying to program the 2 controllers MSP430FR6047 and the MSP430F5528 using the LP-XDS110ET programmer/debugger and the uniFlash tool. The issue I am running into is when I plug it in that brings up a completely different program board as shown in the image below:
I have included images of my setup. I am using the LP-XDS110ET with a usb connection to my laptop and a JTAG connection to my board with the MSP430FR6047 and the MSP430F5528 chips.
I also am seeing these as my drives when I plug in the LP-XDS110ET.
If I try to manually select my controller and select any of USB hubs and load the image it gives me this error saying that: "Error initializing emulator: No USB FET was found". I have included an image of the error below.
ERROR:
I have tried plugging in the board to 2 different computers with uniflash installed and I am seeing the same thing.
