CC1352P: CC1352P

Jacky Hung

Prodigy 60 points

Part Number: CC1352P

Hi Sirs,

I need use CC1352P to transfer data rate with 2MB/s.

The code structure as below :

RX : RF → RF FIFO → DMA → SRAM buffer → App

TX : App → SRAM buffer → DMA → RF FIFO → RF

Could you advise the sample on SDK tool ?

Thanks

Jacky

3 months ago

0 Daniel Guarecuco Aguiar 3 months ago

TI__Expert 4947 points

Hi Jacky,

Can you provide more details? CC1352P is a dual band device, meaning it can operate on Sub-1 GHz and 2.4 GHz, what is your intended band? Do you have any particular stack or protocol in mind? From your previous questions I believe you are using the BLE stack?

I recommend you go through the SimpleLink Academy labs to get an introduction to the stacks.

SimpleLink Academy for CC13xx CC26xx

Best regards

Daniel

0 Jacky Hung 3 months ago in reply to Daniel Guarecuco Aguiar

Prodigy 60 points

Hi Daniel,

I use the "Launchxl-CC1352P-4" to test my project with BLE Sub-1 GHz.

I use BT tool to test "Launchxl-CC1352P-4" to transfer data now.

And my project need to use "Launchxl-CC1352P-4" to transfer data.

Could you suggest any sample code on SDK?

Thanks

Jacky

0 Daniel Guarecuco Aguiar 3 months ago in reply to Jacky Hung

TI__Expert 4947 points

Hi Jacky,

BLE is on 2.4 GHz, If you want to use BLE, I suggest you start with a simple_central and simple_peripheral or project_zero.

On Sub-1 GHz we have TI15.4-Stack and proper_rf examples.

You can find any of these examples on your <SDK_install>/examples/rtos/CC1352P_4_LAUNCHXL

However your description is too generic for me to able to recommend you anything, if you give me some more details of what you want to achieve, we can point you into the right direction.

Best regards,

Daniel

Sub-1 GHz

Sub-1 GHz forum

CC1352P: CC1352P