• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 143 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Can 2 End devices running simpliciti communicate in low power mode ?

N. E. Buddy
Prodigy 120 points
Other Parts Discussed in Thread: SIMPLICITI

Hi, 

Can two End devices (ED) exchange data over Simpliciti protocol if both go to sleep and wake upon timer/external events ?

If I grab it right there must be an 'always on' AP involved. Am I right ?

Thanks in advance for any advice

  • 0
    Genius 3370 points

    Yeah, the AP is needed to store and forward the packets between the sleeping nodes. Otherwise you would miss packets while a unit is asleep. The only other option would vbe a Wake on Radio mode. Lowest power for that would be a radio chip that supported RX sniffing but it still draws a few micro-amps.