CC1110 AES encryption design note DN108

Henry Hallam

Hi,

Please could someone send me the latest revision of DN108 relating to use of the CC1110's AES coprocessor. I am in the United States.

Thanks,

Henry Hallam

Cosmogia inc

San Francisco, CA

over 12 years ago

0 TER over 12 years ago

TI__Guru**** 317180 points

I think you could find the app note here (after a short google search): http://www.prochild.com/board/files/tb_3/DN108%20Using%20AES%20Encrytion%20in%20CC111xFx_CC243x%20and%20CC251xFx%20swra172.pdf

0 Henry Hallam over 12 years ago in reply to TER

Prodigy 50 points

I have been using that one, but it is outdated and doesn't include details of the delays necessary between writing and reading from the buffers, see post from RF4ALL here:

http://e2e.ti.com/support/low_power_rf/f/156/t/16874.aspx

0 TER over 12 years ago in reply to Henry Hallam

TI__Guru**** 317180 points

Sorry, didn't check the version on the one I found online compared to the one I have locally. I can mail it to you but need information about where to.

0 Henry Hallam over 12 years ago in reply to TER

Prodigy 50 points

Thanks, an email to [deleted] would be great.

0 Ali Awan over 11 years ago in reply to Henry Hallam

Prodigy 210 points

Hello All!

i am using a simple MRFI Link using RS 232 on the CC1110...the example included in swru222b for CC1110 is a great ack based handshake example...i used it to establish the UART bridge...sent data from one PC to another seamlessly....but ever since i have added the AES unit functionality in my software...the performance has been affected severely...dont know what is happening...i am stunned..please help....

best regards

ali

Sub-1 GHz

Sub-1 GHz forum

CC1110 AES encryption design note DN108