CC2430 factory firmware code source

The software is found in several place. I go to http://focus.ti.com/docs/toolsw/folders/print/cc2430dk.html once there go down to SmartRF Flash Programmer (Rev. H) (zip 8327 KB) and install this application.

The second web page that is important is http://focus.ti.com/docs/toolsw/folders/print/smartrftm-studio.html   Read through the information and download and install

The third one is at http://focus.ti.com/docs/toolsw/folders/print/packet-sniffer.html  Once again download and install this app.

This will give you the following:

Ti Flash Programmer - Used for programming the SOC's (CC2430, CC2510, CC1110, etc) and also to access the software on the SmartRF04EB (SRF04)

RF Studio - A nice app that allows you to set the parameters you want on a nice Windows GUI and download them into the SOC.  It also support simple RX and Tx demos and tests.

RF Sniffer - Allows you to "see" the transmitted packet structures on a nice Windows GUI in real time.

There are other packages as well, but this will get you started.  Which CCxxxxEM modules did it come with? I asssume the CC2430EMs from your post but it could be others.

Let me know if you have problems or are ready for more

-H

Hello,

Thank you for your answer. I allready got these software and i'm able to flash new firmware as location engine, tests for RF, ADC and so on.

I also play with smartrf studio to make a communication between 2 smartrf04eb boards and it works fine.

My problem was to find the source code of the main application which was loaded in factory for the CC2430EM module plugged on the SmartRFEB.

I would like to be able to recompile the factory test application because i can get some parts of the code that interest me.

Thank you for your help

Fred

Hello,

1. I'm unable to compile the two examples in the zip file.

2. Is there a localization demo application ready to deploy ?

tkx