CCSV6 on CC1125DK : Reloading the PER test after running "Flashing the LED" sample

Ariel Arnaiz

Other Parts Discussed in Thread: CC1125DK

Hi all,

First of all , please bear with me as I have probably a basic question for many of the members here.

I am starting to learn the code composer studiov6 uploading the sample "Flashing the LED code" on CC1125DK MSP340.

It worked ! but now my problem is how to erase it and revert ( reload?) to the built-in PER testing program, as I need to do some basic RF 'field' performance test first between the master-slave pair I have here.

Appreciate any help.

Thanks

ariel

over 11 years ago

0 Martin B over 11 years ago

TI__Genius 12735 points

The latest version of the PER test can be found here:

http://www.ti.com/lit/zip/swrc219

In the IDE folder you can find a binary hex file which can be used to reprogram the trxEB using the SmartRF Flash Programmer. Do the following:

Open the SmartRF Flash Programmer
Select "Program CCxxxx SOC or MSP430
Choose the MSP430 tab
Find the path to the hex file
Press the "Perform actions" button to program the board

0 Ariel Arnaiz over 11 years ago in reply to Martin B

Prodigy 50 points

Thanks a lot Martin.

Sub-1 GHz

Sub-1 GHz forum

CCSV6 on CC1125DK : Reloading the PER test after running "Flashing the LED" sample