• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 261 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Setting for the protection against noise on CC1200

Nomo
Guru 16800 points
Other Parts Discussed in Thread: CC1200

Hello,

On my customer's board, PER is very bad.
As one of the reasons, the noise (such as background noise) will affect the RF characteristics.
Please let me know the resistor to protect against noise on CC1200.

Best Regards,

Nomoto

  • 0
    TI__Mastermind 33190 points
    The environment noise will always set the base line for the sensitivity limit since the radio needs a certain signal to noise ratio to demodulate signals. Which frequency are you operating at ? If you measure with just an antenna on a spectrum analyzer, which signal levels do you measure ?

    Regards,
    Richard