cc1125 sample code for ETSI category 1

kyt

Other Parts Discussed in Thread: CC1125, CC1125EM-868-RD, CC1125DK

Hi,

Now we try to make ETSI category 1 RF module with CC1125.

I checked below news release and TI design.

-TI launches first fully integrated ETSI category 1 transceiver for wireless social alarms and ultra narrowband applications

/////////////////////////////////////////////////////////////////////

-ETSI Cat 1 RF Layout Reference Design

(ACTIVE) CC1125EM-868-RD

-CC1125 Operating in 25 kHz Channels at 869 MHz, ETSI　Category 1

-CC1125 Development Kit

(ACTIVE) CC1125DK $299.00(USD)

/////////////////////////////////////////////////////////////////////

TI-design is helpful for us.

And we look for ETSI cat1 sample code.

Target MCU is not fixed.

I found only device driver file MSP430 for CC112x in SmartRFstudio.

Please let me know any resources if you have.

best regards,

kyt

0 TER over 10 years ago

Our software examples are written for MSP430 (processors.wiki.ti.com/.../Category:Sub-1GHz, software examples under www.ti.com/.../toolssoftware) For other MCUs the user has to find/develop SPI drivers themself.

0 kyt over 10 years ago in reply to TER

Expert 2355 points

TER

Thanks for your reply.

I understand that TI can provide driver code for MSP,and ETSI Cat1 MAC software is made by user own.

Thanks your correct support.

best regards,

kyt

Sub-1 GHz forum