• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 53 subscribers
  • Views 330 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[CC1200] Usage of CC1200 as repeater

Kaka
Guru 24520 points
Other Parts Discussed in Thread: CC1200

Hi community member,

Please let me confirm the following question.

[Question]
Can customer change the RX frequency and TX frequency in dynamically?
**Now customer would like to use the CC1200 as repeater.

If yes, would you please teach me the implementation method and the concerns or limitations?

If you have any questions, please let me know.
Best regards.
Kaka

  • 0
    TI__Guru**** 317180 points
    To change either the Tx or Rx frequency the CC1200 has to be in IDLE. To change the frequency they have to write the FREQ word, see 9.12 in the UserGuide. If the new frequency is more than about 1 MHz from the old frequency a calibration has to be done.
  • 0 in reply to TER
    Guru 24520 points
    Hi TER,

    Thank you for your response.
    I will inform them to my customer.
    If I get more questions, please let me confirm it.

    Best regards.
    Kaka