CC1310 support OOK modulation format?

Jacky Zhu

Prodigy 190 points

Other Parts Discussed in Thread: CC1310

Hi,

I'm considering CC1310 in my design.

I need a chip which support OOK modulation format,

but in "CC1310 SimpleLink Wireless MCU silicon errate", I found following info:

"The supported modulation format at product release is 2-GFSK.
4-FSK, DSSS, and OOK modulation as well as Manchester coding are not supported."

I want to know whether CC1310 support OOK now.

If it not support, when will this feature available?

Thanks

Jacky

over 9 years ago

0 TER over 9 years ago

TI__Guru**** 317180 points

CC1310 supports OOK, see SmartRF Studio for settings.

0 Jacky Zhu over 9 years ago in reply to TER

Prodigy 190 points

Thank you for your reply.
But in CC1310 Device Control Panel of SmartRF Studio, I just found two kinds of typical setting for CC1310.
The setting names are "50kbps, 2-GFSK, 25-kHz deviation" and "625bps, Long range mode".
There is no OOK setting in "Typical Settings".
Would you please show me a little more detail for setting OOK?Thank you
PS. My SmartRF Studio version is v7-2.2.1.

0 TER over 9 years ago in reply to Jacky Zhu

TI__Guru**** 317180 points

Install the newest release of SmartRF Studio.

0 Jacky Zhu over 9 years ago in reply to TER

Prodigy 190 points

Thank you for your reply.After install the latest release of SmartRF Studio,
I found the OOK setting in CC1310 Device Control Panel.
I download the SmartRF Studio about one month ago, so I don't realize my download version is not the latest one.
Next time, I will check the version first.Thank you for you reply again.

Sub-1 GHz

Sub-1 GHz forum

CC1310 support OOK modulation format?