CC1200 205-235 MHz

Sargis Sargsyan

Other Parts Discussed in Thread: CC1201, CC1200, CC1120

Hi,

I had designed cc1201 for ISM band and it is working. Besides, I need the transceiver module for 205-237 Mhz but I'm concerned about this band, because for cc1201 it is mentioned in the datasheet that the frequency band is possible for support. Is there anyone who knows exactly is there a support or not? And is there any one whose had a succeed experience with cc1201 at 205-237MHz bandwidth?

Thanks,

Sargis Sargsyan

over 9 years ago

0 PM over 9 years ago

TI__Mastermind 27145 points

Hi,

The chip can be used in the band of 204~237MHz. But full characterization data or the Reference design is not available.

If you put togather a schematic based on 420MHz band design, which is available on the TI website then we will help you in reviewing it.

Thanks,

0 TER over 9 years ago in reply to PM

TI__Guru**** 317180 points

We have a reference design for 169 MHz and one for 274 MHz - 320 MHz (www.ti.com/.../swra398a.pdf. The front end on CC1120 and CC1200 is equal)

If you chose values between the values shown in these two reference design you have a very good start for your design.

Sub-1 GHz

Sub-1 GHz forum

CC1200 205-235 MHz