• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 53 subscribers
  • Views 214 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

communication fail in between CC430F5137(End Point) and CC430F6137(Access Point)

chang hwan cho
Prodigy 10 points
Other Parts Discussed in Thread: SIMPLICITI

Hello, All

I use TI SimpliciTI solution to make Peer- Peer production. This production have  one Access Point  and  one End point and communication with each other. 

"A" pair have joined,  linked, and communicated and "B" pair also have  joined,  linked, and communicated successfully. "A" and "B" pair have different link, join and device information and I think only "A" and "B" pair communicated independent.

I have problem that one of them have fail in communication and other have communicated still. Test procedure is below.

1.  "A" pair have joined, linked, and communicated 

2. Check "A" Access Point and "A" End Point and if ok, go to next step.

3.  "B" pair have joined, linked, and communicated 

4. Check "B" Access Point and "B" End Point and if ok, go to next step.

5. Check "A" and "B" pair communication
6. After setting (1~5 step) and spent several minutes, it happen "A" pair don't communicate.
what is problem? Stack or my application program. when  Single Pair have communicated, there is no problem. But when above 2 pair product work same place and time, one pair don't communicate and other work well.