CC1200 matching circuit for 220MHz

Edward Chang

Intellectual 1630 points

Other Parts Discussed in Thread: CC1200, CC1120

Hi,

How to design the matching circuit of CC1200 for 220MHz? Can you provide the recommended value of matching components?

Regards,

Edward

over 8 years ago

0 Sverre over 8 years ago

TI__Mastermind 39860 points

Unfortunately we do not have a BOM for 220 MHz operation. My suggestion would be to use the 169 MHz reference design as a starting point and decrease the balun and filter component values by one or two steps on the E12 series

0 Edward Chang over 8 years ago in reply to Sverre

TI__Intellectual 1630 points

Hi Sverre,

I only found 420-470MHz and 868-930MHz reference designs for CC1200. Can I use 169MHz ref design for CC1120?
www.ti.com/.../CC1120EM-169-RD

Edward

0 RGW over 8 years ago in reply to Edward Chang

TI__Mastermind 33100 points

Yes, but changing from CC1120 to CC1200 then you will have to change two additional components:
C231: 1.8 nF -> 1.5nF
X1: 32 MHz -> 40 MHz

//Richard

0 RGW over 8 years ago in reply to RGW

TI__Mastermind 33100 points

For 220 MHz,
Change the balun caps C201 & C191: from 12 pF to 6.8 pF

Sub-1 GHz

Sub-1 GHz forum

CC1200 matching circuit for 220MHz