CC1350STK: Default BLE Stack/App source files and hex files.

Petty Katty

Part Number: CC1350STK
Other Parts Discussed in Thread: CC1350, , CC2650STK

Dear TI experts,

I want to restore the CC1350 sensortag to its factory default. I could find neither the sensortag project for CC1350STK with default factory functionality nor the firmware hex file.

The default functionality is the same as CC2650STK 's default.

Could you please help me to find the BLE Stack/App project or at least the fimrware hex file?

(Board Rev: 1.4.5, FW Rev: 1.3.1)

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735685 points

For BLE part CC1350STK is the same to CC2650STK. You can download cc2650stk_sensortag_rel.hex in BLE Stack v2.2.1 to your CC1350STK.

0 Petty Katty over 8 years ago in reply to YiKai Chen

Prodigy 130 points

Thank you YiKai Chen,

I have tried this hex file. It did not work.

0 YiKai Chen over 8 years ago in reply to Petty Katty

Guru 735685 points

After testing with my CC1350STK, I see it doesn't work too.

0 YiKai Chen over 8 years ago in reply to Petty Katty

Guru 735685 points

I find FW for CC1350STK in BLE Device monitor and attach it for your reference.

CC1350SensorTag_BLE_All_v1_31.zip

0 Petty Katty over 8 years ago in reply to YiKai Chen

Prodigy 130 points

Thank you,
I checked it and now it is working in BLE mode.

0 YiKai Chen over 8 years ago in reply to Petty Katty

Guru 735685 points

You are welcome and it's good to know it works now.

Sub-1 GHz

Sub-1 GHz forum

CC1350STK: Default BLE Stack/App source files and hex files.