• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 3895 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/CC1310: ti.sysbios.knl is not compatible with XDCtools

Zee blue
Intellectual 320 points
Part Number: CC1310
Other Parts Discussed in Thread: SYSBIOS

Tool/software: TI-RTOS

Hi,

When migrated one of the old code to new ccsv7 and rtos versions I am getting the following error.Could you please guide what went wrong?

Description Resource Path Location Type
fatal error #35: #error directive: The package 'ti.sysbios.knl' is not compatible with XDCtools used in this build. Please rebuild the package with XDCtools 3.50 or later. .xdchelp 

 

Regards

Zee

  • 0
    TI__Genius 14860 points

    Hi,

    I confirm the error that you see. But,

    • XDCTools 3.50.1.12 exists, but it is not (any longer?) available for public download. I don't know the reason, it might have been recalled.
    • TI-RTOS 2.21 was published during the time of XDC 3.32.01.22. Please download and use that version instead. Extract it to the ti folder and in CCS, click on Window -> Preferences -> Producs -> Install.

    However, the error message that you see, is misleading. If have reported that as a bug.

  • 0 in reply to Richard W.
    Intellectual 320 points
    Hi Richard,
    So you are not recommending to use XDC3.50.1.12 but to proceed with XDC3.32.01.22. Right..?
    But unfortunately still the errors are there...
    Regards
    Zee
  • 0 in reply to Zee blue
    TI__Genius 14860 points

    Hi,

    I've verified that the combination  CCS 7.0.0, XDCTools 3.32.01.22, TI-RTOS 2.21 works. Are you sure that you set the correct version for XDCTools in your project?