• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 892 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC430F5147: Footprint for Breakout board design

Ana Covic
Prodigy 40 points
Part Number: CC430F5147


I am pretty sure I am entering wrong forum topic, but this is my first time posting and it's hard to navigate.

I need a foot print for this chip to make a breakout board. Does anyone know if breakout layout already exists, or I need to make one?

If I need to make one, can someone help me which footprint to search for in Altium Library(or somewhere else)?

Best,

Ana

  • 0
    TI__Guru**** 317180 points
    How the footprint for this chip has to look like is described in the datasheet, at the end. In Altium you need to search for a 48 pin QFN packet. Normally the footprint for a given chip has to be added to the library. You have to check with the CAD responsible.

    What type of break out board are you planning to make?
  • 0 in reply to TER
    Mastermind 9802 points
    In Altium, it's easy-peasy: Go to PCB library, and select "IPC Compliant Footprint Wizard" then enter the parameters off the datasheet.

    For extra credit, find a STEP file for the package (see www.3dcontentcentral) and plop it in. Now you have a good quality model.