CC1310: Read GPS data by Sensor Controller Studio

user5013901

Part Number: CC1310

Hello,

I am trying to read the data sent by a GPS module using a CC1310 Launchpad. I hope that I can insert some code in CC1310's MCU to operate it. Could I realize this task by using Sensor Controller Studio? Because after installing Sensor Controller Studio, I find that there are only several functions. Thank you very much!

over 8 years ago

0 TER over 8 years ago

TI__Guru**** 317180 points

To be able to answer that question we need more information about which interface the GPS module has. The sensor controller can do a bit banged SPI and I2C interface and more.

0 user5013901 over 8 years ago in reply to TER

Prodigy 130 points

We use GN-5203, an ultra-high performance GNSS smart antenna module. It is manufactured in NaviSys Technology.

0 TER over 8 years ago in reply to user5013901

TI__Guru**** 317180 points

I asked about the interface, not the type of GPS module. It looks like this module uses a serial interface which should be possible to do with the Sensor Controller. Note that the GPS module uses TTL levels, you have to ensure that those are compatible with the rest of the system.

Sub-1 GHz

Sub-1 GHz forum

CC1310: Read GPS data by Sensor Controller Studio