• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 620 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC1310: Collector and sensor example

Benson Lo
Intellectual 740 points
Part Number: LAUNCHXL-CC1310
Other Parts Discussed in Thread: CC1310

Hi all,

I have question about the collector and sensor examples.

My Setup:
Program the Collector and Sensor example to two CC1310 launchpad. Connection is okay and Collector able to receive sensor data.

Question:
When I reprogram the sensor, seem the connection is okay but cannot see any sensor data in Collector LP.

Anyone know the failure reason?

But if I reprogram the collector also, the Collector can receive sensor data again.

Thanks,
Benson

  • 0
    TI__Mastermind 32840 points
    Hi Benson,

    On the sensor, does the LED turn on to indicate a successful connection?

    After reprogramming the sensor, do you press the button for the collector to permit joining?
    I did this and the collector is able to receive sensor data.
    The sensor and collector use NV memory to store network information. When you reprogram sensor, this information is cleared, so the sensor must join the network again.


    Regards,
    Toby