CC1310: 15.4 stack RSSI before paired

Benson Lo

Intellectual 740 points

Part Number: CC1310

Hi all,

I am using Ti 15.4 stack, frequency hopping mode, project start from collector and sensor example.

I would like to list the signal strength of all sensor in the air before pairing.

Is it possible to get the RSSI of the sensor during network join or association procedure? How?

Thanks,

Benson

over 7 years ago

0 IUsedToBeARealPerson (M-W) over 7 years ago

TI__Guru 58425 points

Hi Benson,

I will ask a colleague of mine about this and get back to you.

0 Hector_r over 7 years ago

TI__Genius 12415 points

You can do this in the function "wsAsyncIndCb" in the file cllc.c if you just want the rssi of the devices joining you can do a check for if( pData->fhFrameType == ApiMac_fhFrameType_panAdvertSolicit)

then you can get the rssi from pData->rssi

Regards,
Hector

0 Benson Lo over 7 years ago in reply to Hector_r

Intellectual 740 points

Tested, it works. Thanks Hector and M-W.

Sub-1 GHz

Sub-1 GHz forum

CC1310: 15.4 stack RSSI before paired