Compiler/CC1350: CC1350 BLUETOOTH CONNECTION TO PHONE

Mucahit Arslan

Prodigy 65 points

Part Number: CC1350

Tool/software: TI C/C++ Compiler

I did Sub 1 Ghz connection between cc1350 sensortag and cc1350 launchpad.

I used RFpacketRx and I take information from sensortag.

My question is that how can I send information(that takes from sensortag) launchpad to SmartPhone on Bluetooth ?

over 7 years ago

0 Evan W over 7 years ago

TI__Mastermind 40460 points

Hi Muchahit,

You would need to have the BLE Stack software to do this as well. Currently, we don't have full BLE stack + Prop RF stack support on the CC1350. To do true multiprotocol, you would need to look at the CC1352 and the Dynamic Multi-protocol Manager. You can find more info here:
dev.ti.com/.../dmm_fundamentals.html

0 Evan W over 7 years ago in reply to Evan W

TI__Mastermind 40460 points

You may look at this as well:
dev.ti.com/.../README.html
That example does sub 1 ghz with the 15.4 stack provided by TI with the uBLE Stack advertising to a phone. It doesn't connect to a phone though.

If you want to do true connections, you will need to use dynamic multi-protocol manager like i suggested in the previous post.

Sub-1 GHz

Sub-1 GHz forum

Compiler/CC1350: CC1350 BLUETOOTH CONNECTION TO PHONE