CC1310: Smart RF sniffer agent

Pu PiPo

Part Number: CC1310

I can't find connected device when use Smart RF sniffer agent 2 although i plugged my board to pc and flash image .Anyone can help me to fix it.

over 7 years ago

0 Matt Calvo over 7 years ago

TI__Genius 14755 points

Hello,

Please refer to this detailed Packet Sniffer setup tutorial for a step by step walk-through on how to get the Packet Sniffer application up and running.

dev.ti.com/.../packet-sniffer.html

Best regards,

Matt Calvo

0 Pu PiPo over 7 years ago in reply to Matt Calvo

Intellectual 750 points

I followed that link, but i can't still find device when i scan with TiWsPc2. My board is CC13-90

0 Matt Calvo over 7 years ago in reply to Pu PiPo

TI__Genius 14755 points

Hello,

If you navigate to the SmartRF Packet Sniffer 2 download directory, you can find the most recent SmartRF Packet Sniffer 2 User's Guide in the docs folder. This User's Guide provides a list of the supported hardware for the application and the CC13-90 is not a supported hardware for the SmartRF Packet Sniffer 2 application. You will need to use an EVM that is supported to perform packet sniffing.

Best regards,

Matt

0 Pu PiPo over 7 years ago in reply to Matt Calvo

Intellectual 750 points

Thank Matt

Sub-1 GHz

Sub-1 GHz forum

CC1310: Smart RF sniffer agent