• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 545 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC1350: SimpleLink Academy docs must be corrected - python tools for OAD image build no longer exist!

LouEEEE!
Expert 1955 points
Part Number: LAUNCHXL-CC1350
Other Parts Discussed in Thread: CC1350, SIMPLICITI

Ti Friends!

SimpleLink Academy docs must be corrected. New to the CC1350, I'd been diligently following Project0 instructions on TiRex. No good!

The tools referenced in those docs - python tools to consolidate/convert images, etc. - no longer exist on GitHub.

Post here seems to be on point for course correction (with thanks to poster): 

Really, apart from building an understanding of the whole Image/OAD foodchain, I'd like to revert the board to its out-of-box state. We wish to duplicate the entire firmware update process ground-up.

Again, lots of time wasted (by a motivated experimenter) just to get to the proverbial Square One.

  • 0
    Expert 1955 points

    In fact, while we're on it: Project0 docs refer to rfWsnDmMode in CCS - to which project in the revised SDK should this refer? There are several similarly-named projects.

    Are all of the other steps - copying various configuration files, etc. - still on point?

    For the noob, the question would be: Is the roadmap the same now that the build instructions are clearly out-of-sync with current SDK?

  • 0 in reply to LouEEEE!
    TI__Intellectual 1040 points
    Hi LouEEE,

    Thank you for pointing out the documentation disconnect.
    Which SDK are you referring to? rfWsnDmNode is a project that is no longer supported but was part of the SDK in one of the early versions. The project in the SDK should also have a README.md file. If you are having trouble with the SimpleLink Academy you should refer to this as it is updated based on that SDK release. Similarly, there is a User's Guide for OAD with each SDK. I have added the link for the latest SDK User's Guide for EasyLink OAD. The rfWsnDmNode is most closely related to the rfWsnNode for CC13x0 and the rfWsnNodeBleAdv for CC13x2 devices.

    I hope this helps you get the correct configuration and steps.

    User's Guide for Simplelink CC13x0 SDK v 2.20.00.38
    Easylink - dev.ti.com/.../index-cc13x0.html
    OAD - dev.ti.com/.../oad.html