CC1110-CC1111DK: Asynchronous serial mode CC1111DK

late lawson

Part Number: CC1110-CC1111DK

Hello - I am working on the RF transmition with cc1111. I would like to transmit datas(RF) via asynchronous serial mode configuration. This kind of configuration is specified just for the cc1110 (with p0_7 pin). Does sommebody know how to configure the cc11111 in the same mode (p0_7 doesn,t exist on cc1111)? Thankx a lot

over 6 years ago

0 Siri over 6 years ago

TI__Guru* 85791 points

I do not think this is possible on the CC1111, but this is unfortunately not clear form the app note describing serial mode on the CC111x devices.
Why do you want to use serial mode in TX anyway? You can turn off preamble and sync and then use fixed packet length and then send whatever packet format that you like using "ordinary" packet mode.

Siri

0 late lawson over 6 years ago in reply to Siri

Prodigy 20 points

Thanks for your answer. I do think this is not possible in that way

0 TER over 6 years ago in reply to late lawson

TI__Guru**** 317180 points

What do you refer to when you write " I do think this is not possible in that way"? Are you referring to placing the full packet in payload and if that is the case why shouldn't that solution work?

Sub-1 GHz

Sub-1 GHz forum

CC1110-CC1111DK: Asynchronous serial mode CC1111DK