CC1310: OTA example for CC1310?

while this information is very useful.

I'm also looking for the BIM project.
There is one for CCS but not for IAR.


Vitaly

If you install latest CC13x0 SDK, you can find IAR BIM project under \examples\rtos\CC1350_LAUNCHXL\blestack\util\bim\tirtos\iar

Thanks.

I'm trying to compile the project and it pass the compilation without errors.

But after wards, at the loading stage I get the following error:
missing or malformed flash loader specification file c:\ProgramFiles (x86)\IAR Systems\..\flashloader\TexasInstrumetns\FlashCC26xxF128RAM20.flash

I must mention that the other project are loading fine.

Vitaly

Which IDE do you use? IAR or CCS?

IAR version 8.20.1

I don’t have experience building BIM with IAR. I would suggest you to use CCS instead of IAR to try again.

I'm afraid it's not possible at this stage of the project.

Is there no one in TI that could assist us with it?

Vitaly

Do you use CC13x0 SDK 2.20.00.38? If so, you should try IAR EWARM 8.20.2.58 which is mentioned in release note.