LAUNCHXL-CC1352R1: CC1352R KNX SETTINGS IN SMARTRF STUDIO

user5138823

Prodigy 40 points

Part Number: LAUNCHXL-CC1352R1

hi, i need settings for KNX. I sniff only packets with CRC error. Can you help me please ?

over 6 years ago

0 TER over 6 years ago

TI__Guru**** 317180 points

Please look at e2e.ti.com/.../192994

The packet format used is not supported by SmartRF Studio, you have to use one of the RF examples and modify this to handle the packet format. You may need to use the RX adv command.

0 user5138823 over 6 years ago in reply to TER

Prodigy 40 points

Can you help me pls ? i don´t know how begin...

0 TER over 6 years ago in reply to user5138823

TI__Guru**** 317180 points

You are not referring to exactly what you need help with. For use of the rx commands, start with:

dev.ti.com/.../overview.html

Sub-1 GHz

Sub-1 GHz forum

LAUNCHXL-CC1352R1: CC1352R KNX SETTINGS IN SMARTRF STUDIO