CC1120EM-420-470-RD: Review design using helical antenna

Sudesh Sheodass

Intellectual 680 points

Part Number: CC1120EM-420-470-RD

We have a CC1120 design (433MHz band) on a new product using a helical antenna.

1. Can TI review our design (layout and schematic)? Do you normally do this?

2. Can TI provide any recommendations when using a helical antenna?

regards

Sudesh

over 5 years ago

0 RGW over 5 years ago

TI__Mastermind 31560 points

Hi,

Sure. We can review your schematic and layout.

For the helical antenna, try to maximize the placement clearance distance to GND to increase the efficiency. Will you be using a wire helical antenna or PCB helical ?

Regards,
Richard

0 Sudesh Sheodass over 5 years ago in reply to RGW

Intellectual 680 points

Thanks. I will upload files for review. We will be using a wire helical antenna.

0 Sudesh Sheodass over 5 years ago in reply to Sudesh Sheodass

Intellectual 680 points

Hi Richard.
Can we send the pcb layout and schematic files for review via email as I'm not allowed to post company confidential designs on the forum. My work email is: sudesh@prepaidworl.co.za.
Can you send me an email and I will respond with the files?
Thanks for the support.
regards
Sudesh