Linux/CC1350: Unable to create OAD setup for collector

Hello Pratik,

What collector example are you flashing?
What SDK version are you using?
Can you walk me through the steps that you took to get to where you are now?

Thanks,
AB

Hi AB,

For collector i have downloaded :

Sub-1 GHz Sensor to Cloud Industrial IoT Gateway Reference Design for Linux Systems : TIDEP0084

i am using this example for normal 15.4 node - concentrator communication.

For OAD :

I have erased external flash using this hex file.

C:\ti\simplelink_cc13x0_sdk_2_20_00_38\examples\rtos\CC1350_LAUNCHXL\ti154stack\hexfiles\oad\erase_extflash_cc1350lp.hex

I have loaded co-processor with following hex:

C:\ti\simplelink_cc13x0_sdk_2_20_00_38\examples\rtos\CC1350_LAUNCHXL\ti154stack\hexfiles\coprocessor_cc13xx_lp.hex

Then i removed IS_HEADLESS Cflag from Makefile in my collector folder.
And i compiled it and run it again.
But as it is showing here:
http://dev.ti.com/tirex/content/simplelink_cc13x0_sdk_1_40_00_10/docs/ti154stack/ti154stack-users-guide/ti154stack/native-oad.html#native-oad-example 
i am not getting new terminal to enter commands.
Even my application is not waiting for commands to enter.
Can you guide me exactly what needs to done to start OAD on linux based collector application, consider i have whole Collector application from TIDEP0084 from github


Thanks,
Pratik