cc1310 100k RF configuration

jun jun

Intellectual 300 points

Part Number: CC1310

Tool/software: TI-RTOS

Hi :

Screenshot is the SmartRF Studio 7 2.12.1 779-930Mhz band Configuration , it does not include 100k option .

can we use 50k option like this , Change three parameters ( Symbol-rate , Deviation , RX-filter-BW) , then export code

B.R

over 7 years ago

0 Simon J over 7 years ago

TI__Genius 11810 points

Hi,

You are free to adjust the settings as you want and you'll get a warning from SmartRF Studio if you use settings that are not compatible with each other. Note that only the "Typical Settings" have been tested by TI so you have to verify that your settings are regulatory compliant etc.

-Simon

0 TER over 7 years ago in reply to Simon J

TI__Guru**** 317180 points

For 100 kbps you can also look at part of the settings used in www.ti.com/.../swra522e.pdf

Sub-1 GHz

Sub-1 GHz forum

cc1310 100k RF configuration