CC1312R: easylink IEEE802.15.4 Tx & Rx for the launchexl Board for CC1312P

Rahul Ramachandran

Prodigy 740 points

Part Number: CC1312R
Other Parts Discussed in Thread: CC2520

Can we get example project of easylink IEEE802.15.4 Tx & Rx for the launchexl baord. We couldnt find it in the SDK.

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735685 points

As I know, TI doesn’t provide such examples for CC13xx devices.

0 Fredrik K over 6 years ago

TI__Guru** 106705 points

Hi Rahul,

Which specific PHY are you after? It is quite easy to change this in the Easylink examples.

Regards,
Fredrik

0 Bibin Varghese over 6 years ago in reply to Fredrik K

Intellectual 815 points

We want to tx/rx frames compliant to IEE802.15.4 b/e(DSSS+OQPSK+1/2 sine pulse shaping PHY similar to CC2520). Is there any example project for CC1352P-2 launchpad? Otherwise can we know the steps to convert the prop. easylink example?

0 Fredrik K over 6 years ago in reply to Bibin Varghese

TI__Guru** 106705 points

Hi Bibin,

You can do code export for the settings from SmartRF Studio.

Regards,
Fredrik

Sub-1 GHz

Sub-1 GHz forum

CC1312R: easylink IEEE802.15.4 Tx & Rx for the launchexl Board for CC1312P