CC1310: Schematic and Layout issue

I can take a quick look at the schematic/ layout, I would need pdf/ gerber files. You can send me a friend request with the files if you don't want to have the files shared in public domain.

Also, look through http://www.ti.com/lit/an/swra603/swra603.pdf and http://www.ti.com/lit/an/swra640a/swra640a.pdf

Hi Ter,

Those weeks we still fine tune other component, if ready will send to you help to review. Thanks so much.

Regards,

Kevin

I'll close the ticket for now. When you are ready you can post in this thread and the ticket will reopen. 

Hi Ter,

My engineer tell me now we have placement about the designed.  Can you check it? Thanks!!

Regards,

Kevin

I have accepted the friend request

What exactly do you want my to review? The .brd files has just placement and one of them looked like it could contain a CC1190. I thought that the task was to see if I could see why you have poor range on an existing design. 

Hi Ter,

We redesign the layout for my device, we need you help to check the cc1310 and cc1190 and cc2640 and its reference componet arrange in the board is correct. If placement is correct, we can go the next step to layout the circuit. We think the placement will effect the layout step.

If my concept is not correct, please tell me. Thanks!!

Regards,
Kevin

OK, understand. If ready will ask your help.  Thanks!!

Regards,

Kevin

Hi Ter,

We  ready the layout of my project. Can you check it? Thanks!!

Regards,

Kevin

I can take a quick look

We send, please check it .  Thanks!!

Regards,

Kevin