CC1310: Ask advice about Flash and RAM size optimization

You are not writing anything about the software that is used except for which SDK it's based on. Do you have more details? 

Hi TER,

C:\ti\simplelink_cc13x0_sdk_3_10_00_11\examples\rtos\CC1310_LAUNCHXL\sysbios\clock project.

Develop based on this project to realize switching between WOR receive and TX.

Project is smart door lock.

RAM limitation has been resolved by setting sensor controller RAM to general RAM.

But Flash used size is still bigger 1KB even after set the maximum optimization level.

Not much information to go on here. You are writing that they base their code on a given example. We tested the clock example and that has not changed size from an old SDK to the new SDK. 

Hi TER,

Based on customer code, are there any recommended steps for compressing the code space? Thanks.

Do we have the code? I have just seen that this code is based on an example, not how they implement the code.

If customer code is required. I will send it to you by a separate email in tomorrow or later.

Let's stop the discussion here temporary.