• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 519 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1352R: Operations at 1076 MHz to 1315 MHz

Jejomar Ildefonso
Genius 9620 points
Part Number: CC1352R


Hi Team,

Good day! Our customer is looking to use the CC1352R in the 1076 MHz to 1315 MHz RF range. However, little is mentioned regarding operating in this range. Can you guide us on how to configure the device to transmit in this range?  Is it also possible to transmit in CW mode in this range?

Thanks in advance!


Kind Regards,

Jejomar

  • 0
    TI__Guru**** 317180 points

    I'm sitting at home today so I'm not able to do a quick test but I believe that you should be able to use the settings from SmartRF Studio.

    - Change the frequency in SmartRF Studio to the frequency you need to calculate the new freq word. The loDivider setting (CMD_RADIO_DIV_SETUP.loDivider) should be set to 0x4. 

    - CW: Easiest is to use Smart RF Studio and do a code export. Typically the CMD_TX_TEST should be used to get a CW.