• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 55 subscribers
  • Views 431 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1120: ETSI test report

Adrian Ymeraj
Expert 3830 points

Part Number: CC1120

Hello team,

my customer is developing a new application using the CC1120 and from the from the laboratory they ask me if you can provide us with the Test Report relating to the ETSI EN 300 220-1 and ETSI EN 300 220-2 radio tests.

Could you please let me know if we have such collateral? If yes, where to find it?

Thank you and best regards,

Adrian

  • 0
    TI__Guru**** 317180 points

    A certification report is only valid for the hardware and software the certification is done with and hence has no reuse value. We have therefore selected to not share the reports. In addition the ETSI standard has been updated and the required tests have changed since we did certification of out EMs. 

  • 0 in reply to TER
    TI__Expert 3830 points

    So ideally they'll have to run the full setup and validate it for the corresponding certification?

    Is there a way we could help them out?

    Thanks,

    Adrian

  • 0 in reply to Adrian Ymeraj
    TI__Guru**** 317180 points

    A customer always have to do their own ETSI certification at a test house that can do this. 

    Ideally the customer should do a pre-check them self before going to the test house to save time and money. Do they have a spectrum analyzer? 

    For large customers we can do some of this for them if they don't have the equipment.