Programming in smart rf TM studio

Hi

SmartRF Studio primarely function is to easy test and evaluate TI's low power radios and to  find and generate chip spcific register settings. Studio gives an easy acces to the radio registers and lets you perform simple radio functions such as easy link test, per test, setting the radio in TX or RX states.

If you want to download and run your own code, I suggest you use IAR Embedded Workbench to program the MCU and do debugging. There is a free kickstart version with a 4k code size limit at  http://www.iar.com/website1/1.0.1.0/675/1/

If you have saved your code in hex files, you can flash the MCU with the SmartRF Flash Programmer , wich can be downloaded at the TI website.

Best regards

Martin

Hi Henry,

You need a CCDebugger.

Cheers,

Fredrik