CC1352P: Can we use USB Evaluation CC2531 as Packet sniffer

Haricharan Sarpatwar1

Part Number: CC1352P
Other Parts Discussed in Thread: CC1352R, CC2531EMK, CC2531

Hi,

Will the below link will work as a packet sniffer for TI 15.4 Stack (CC1352P)collector and sensor(CC1352R) to track data between collector and sensors? Can we buy this dongle?

over 4 years ago

0 Vegard H over 4 years ago

TI__Expert 4560 points

Yes, If you plan to use SmartRF Packet Sniffer, you can use the CC2531EMK to sniff Zigbee packets.

Regards,
Vegard

0 Haricharan Sarpatwar1 over 4 years ago in reply to Vegard H

Expert 1065 points

Hi vegard,

Thank you for your quick response, we need only subghz collector and. Sensor. To track RF data packets and ack also will this be possible

0 YiKai Chen over 4 years ago in reply to Haricharan Sarpatwar1

Guru 735685 points

CC2531 can only be use to sniff 2.4G 15.4/Zigbee protocol. For sub GHz 15.4 protocol, you would need to use CC13xx launchpad.

0 Vegard H over 4 years ago in reply to YiKai Chen

TI__Expert 4560 points

If you look in the User Guide, in the Getting Started chapter, you can see what devices are required to sniff packets between devices:

Regards,
Vegard

Sub-1 GHz

Sub-1 GHz forum

CC1352P: Can we use USB Evaluation CC2531 as Packet sniffer