CCS/CC1350: send string between cc1350-sub1Ghz

surya

Part Number: CC1350

Tool/software: Code Composer Studio

Hi Experts,

i am working with windows 10 and CCS10.1.1, the above wiki link for Linux users or not

i want to send the string between CC1350 launchpads but i don't know where to start i am a newbie to CCS if you can kindly guide me to the correct way to achieve my task done.

regards

kannan

over 4 years ago

0 Elin W over 4 years ago

TI__Genius 14845 points

Hi Kannan,

To be able to help you with this query I will need some more information from you.

Are you using examples from the SDK? Which example are you using and from which version of the SDK?

Are you following any guides? If so, please link them in this post.

Thanks,
Elin

0 surya over 4 years ago in reply to Elin W

Expert 2395 points

Hi Elin W

thanks for the response, i am working with SimpleLink CC13x0 SDK (4.10.01.01) with rfEasyLinkTx and rfEasyLinkRx example, i don't follow any guides i just start my first project today with cc1350 to transmit string between two boards, and both boards are must communicate based on request string this is what i am trying with cc1350.

regards

surya

0 YiKai Chen over 4 years ago in reply to surya

Guru 735685 points

You can try to use rfEasyLinkNp example which you can send packets using AT command.

0 surya over 4 years ago in reply to YiKai Chen

Expert 2395 points

Hi YiKai Chen

Thanks for the reply, andI am going to use CC1350 as a stand-alone controller so i can't use any other PC/Mc for send AT Commands

0 YiKai Chen over 4 years ago in reply to surya

Guru 735685 points

You can use AT command to get familiar to how it works and revise rfEasyLink example to fulfill your application requirements.

Sub-1 GHz

Sub-1 GHz forum

CCS/CC1350: send string between cc1350-sub1Ghz