CC3235SF: Reference software to interface with Pervasive Display EPDs

Jonathan Navor

Part Number: CC3235SF

Hi team,

Good day! Could you please check our customer concern.

Sianom Technologies has bought CC3235SF development kit from TI for ESL development exercising the WiFi control. Could you please share us a software that can interface with Pervasive Display EPDs?

Thank you.

Best regards,

Jonathan

over 2 years ago

+1 Kobi Leibovitch over 2 years ago

TI__Guru 63006 points

We have the CC3235SF SDK that they can download.

It contain example applications demonstrating various use-cases.

I'm not sure what is the interface that they need to use.

0 Madhuri Kamalapurkar over 2 years ago in reply to Kobi Leibovitch

Prodigy 30 points

The CC3235SF SDK is installed, can you point to the reference Software in the SDK that relates to e-Paper Displays (EPD) application of Pervasive Displays as they are partners of TI

Note that the CC3235SF is being interfaced with - EPD Extension Kit Gen 3 (EXT3) - Pervasive Displays

Application Reference: Demonstrating Wireless control of Electronic Shelf Labels

Setup:

- TI CC3235SF is intended to be interfaced with EPD physically,

- Application processor is intended to be interfaced wirelessly through the WiFi connectivity of CC3235SF to control EPD remotely

Do respond if you need more specific clarifications to support us better

0 Kobi Leibovitch over 2 years ago in reply to Madhuri Kamalapurkar

TI__Guru 63006 points

we don't have example that integrates CC32xx with EPD.

I'm not sure what is the interface needed (UART/SPI). We have some examples (under "Drivers/") showing the use of the peripherals drivers.

The "Demos/" examples focus on wi-fi use cases.

0 Madhuri Kamalapurkar over 2 years ago in reply to Kobi Leibovitch

Prodigy 30 points

The interface used is SPI. I understand TI doesn't have example SW for integrating CC32xx with Pervasive displays EPDs, but can TI support with example SW to support us here ?