WL1831MOD: WL1831MOD and WL1835MOD

steve newman

Prodigy 10 points

Part Number: WL1831MOD
Other Parts Discussed in Thread: WL1835MOD, , WL1837MOD

We are working on a new design using both WL1831MOD and WL1835MOD Bluetooth modules.

We have run into trouble trying to register these parts against out intended end products on the Bluetooth Sig.

The issue seems to be with QDIDs 69886 and 69887 are withdrawn and cannot be used for new listings:.

What are the newer QDIDs we need to register 5.1 stack. were operating on an Android platform.

Further info below:

Declaration ID: D025552

QDID: 69886

Dual Mode stack

and

Declaration ID: D025551

QDID: 69887

Dual Mode Bluetooth 4.0 stack

Paired with

Declaration ID: D052427

QDID: 156961

WL1837MOD

and

Declaration ID: D052428

QDID: 156966

WL1831MOD

over 2 years ago

0 Jacob B. over 2 years ago

TI__Genius 13052 points

Hi Steve,

I’ll follow up tomorrow.

Best,

Jacob

0 Jacob B. over 2 years ago in reply to Jacob B.

TI__Genius 13052 points

Hey Steve,

Here are the new QDID's for Bluetopia 5.1 Host and Profile Subsystem:

Thanks,
Jacob

0 steve newman over 2 years ago in reply to Jacob B.

Prodigy 10 points

Thanks Jacob - will be check that out.

0 steve newman over 2 years ago

Prodigy 10 points

Unfortunately it seems QDID 72097, is a deprecated standard and must be fully tested before it can be registered which is not great.

We are concluding these two TI modules were not a wise choice for our use.

0 Jacob B. over 2 years ago in reply to steve newman

TI__Genius 13052 points

Hi Steve,

We have submitted an updated Profile Subsystem (QDID 185918) that is not deprecated. We are still in the process of updating our Bluetooth stacks on TI.com; however, they should be available in a week or two.

Thanks,
Jacob

Wi-Fi

Wi-Fi forum

WL1831MOD: WL1831MOD and WL1835MOD