128X nlcp porting

Austin Huang

Intellectual 490 points

Hi :

I try to porting nlcp for wl128x.

But I can scan any wifi AP.Pls see attached file.

Does anyone know why???

Fullscreen 5305.123.txt Download

iwlist wlan0 scan
[  340.770000] wl1271: mac80211 bss info changed 0x4000
[  340.770000] wl1271: waking up chip from elp
[  340.780000] wl1271: IRQ
[  340.780000] wl1271: wakeup time: 10 ms
[  340.790000] wl1271: IRQ work
[  340.790000] wl1271: mac80211 config ch 1 psm off power 20 in use changed 0x100
[  340.800000] wl1271: elp work
[  340.800000] wl1271: intr: 0x20 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  340.810000] wl1271: WL1271_ACX_INTR_HW_AVAILABLE
[  340.810000] wl1271: intr: 0x0 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  340.820000] wl1271: RX filters set: 
[  340.830000] wl1271:  - FIF_OTHER_BSS
[  340.830000] wl1271: cmd join
[  340.830000] wl1271: cmd join: basic_rate_set=0x1, rate_set=0x1
[  340.850000] wl1271: IRQ
[  340.860000] wl1271: IRQ work
[  340.860000] wl1271: mac80211 hw scan
[  340.860000] wl1271: intr: 0x8 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  340.870000] wl1271: WL1271_ACX_INTR_EVENT_B
[  340.870000] wl1271: EVENT on mbox 1
[  340.880000] wl1271: MBOX DUMP:
[  340.880000] wl1271:  vector: 0x10000
[  340.890000] wl1271:  mask: 0xff9a1bfe
[  340.890000] wl1271: vector: 0x10000
[  340.890000] wl1271: intr: 0x0 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  340.900000] wl1271: wl1271_scan
[  340.900000] wl1271: band 0, center_freq 2412 
[  340.910000] wl1271: hw_value 1, flags 20
[  340.910000] wl1271: max_antenna_gain 0, max_power 20
[  340.920000] wl1271: beacon_found 0
[  340.920000] wl1271: band 0, center_freq 2417 
[  340.930000] wl1271: hw_value 2, flags 20
[  340.930000] wl1271: max_antenna_gain 0, max_power 20
[  340.930000] wl1271: beacon_found 0
[  340.940000] wl1271: band 0, center_freq 2422 
[  340.940000] wl1271: hw_value 3, flags 20
[  340.950000] wl1271: max_antenna_gain 0, max_power 20
[  340.950000] wl1271: beacon_found 0
[  340.950000] wl1271: band 0, center_freq 2427 
[  340.960000] wl1271: hw_value 4, flags 20
[  340.960000] wl1271: max_antenna_gain 0, max_power 20
[  340.970000] wl1271: beacon_found 0
[  340.970000] wl1271: band 0, center_freq 2432 
[  340.970000] wl1271: hw_value 5, flags 0
[  340.980000] wl1271: max_antenna_gain 0, max_power 20
[  340.980000] wl1271: beacon_found 0
[  340.990000] wl1271: band 0, center_freq 2437 
[  340.990000] wl1271: hw_value 6, flags 0
[  341.000000] wl1271: max_antenna_gain 0, max_power 20
[  341.000000] wl1271: beacon_found 0
[  341.000000] wl1271: band 0, center_freq 2442 
[  341.010000] wl1271: hw_value 7, flags 0
[  341.010000] wl1271: max_antenna_gain 0, max_power 20
[  341.020000] wl1271: beacon_found 0
[  341.020000] wl1271: band 0, center_freq 2447 
[  341.020000] wl1271: hw_value 8, flags 10
[  341.030000] wl1271: max_antenna_gain 0, max_power 20
[  341.030000] wl1271: beacon_found 0
[  341.040000] wl1271: band 0, center_freq 2452 
[  341.040000] wl1271: hw_value 9, flags 10
[  341.040000] wl1271: max_antenna_gain 0, max_power 20
[  341.050000] wl1271: beacon_found 0
[  341.050000] wl1271: band 0, center_freq 2457 
[  341.060000] wl1271: hw_value 10, flags 10
[  341.060000] wl1271: max_antenna_gain 0, max_power 20
[  341.070000] wl1271: beacon_found 0
[  341.070000] wl1271: band 0, center_freq 2462 
[  341.070000] wl1271: hw_value 11, flags 10
[  341.080000] wl1271: max_antenna_gain 0, max_power 20
[  341.080000] wl1271: beacon_found 0
[  341.090000] wl1271: cmd template_set 2
[  341.160000] wl1271: IRQ
[  341.160000] wl1271: IRQ work
[  341.160000] wl1271: intr: 0x4 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  341.170000] wl1271: WL1271_ACX_INTR_EVENT_A
[  341.180000] wl1271: EVENT on mbox 0
[  341.180000] wl1271: MBOX DUMP:
[  341.180000] wl1271:  vector: 0x400
[  341.190000] wl1271:  mask: 0xff9a1bfe
[  341.190000] wl1271: vector: 0x400
[  341.190000] wl1271: status: 0x4c
[  341.200000] wl1271: band 0, center_freq 2467 
[  341.200000] wl1271: hw_value 12, flags 36
[  341.200000] wl1271: max_antenna_gain 0, max_power 20
[  341.210000] wl1271: beacon_found 0
[  341.210000] wl1271: band 0, center_freq 2472 
[  341.220000] wl1271: hw_value 13, flags 36
[  341.220000] wl1271: max_antenna_gain 0, max_power 20
[  341.230000] wl1271: beacon_found 0
[  341.230000] wl1271: band 0, center_freq 2484 
[  341.230000] wl1271: hw_value 14, flags 36
[  341.240000] wl1271: max_antenna_gain 0, max_power 20
[  341.240000] wl1271: beacon_found 0
[  341.250000] wl1271: cmd template_set 2
[  341.250000] wl1271: intr: 0x0 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  341.480000] wl1271: IRQ
[  341.480000] wl1271: IRQ work
[  341.480000] wl1271: intr: 0x8 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  341.490000] wl1271: WL1271_ACX_INTR_EVENT_B
[  341.490000] wl1271: EVENT on mbox 1
[  341.500000] wl1271: MBOX DUMP:
[  341.500000] wl1271:  vector: 0x400
[  341.500000] wl1271:  mask: 0xff9a1bfe
[  341.510000] wl1271: vector: 0x400
[  341.510000] wl1271: status: 0x96
[  341.510000] wl1271: Scanning complete
[  341.520000] wl1271: intr: 0x0 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  341.530000] wl1271: mac80211 hw scan
[  341.530000] wl1271: wl1271_scan
[  341.530000] wl1271: band 1, center_freq 5180 
[  341.540000] wl1271: hw_value 36, flags 26
[  341.540000] wl1271: max_antenna_gain 0, max_power 20
[  341.550000] wl1271: beacon_found 0
[  341.550000] wl1271: band 1, center_freq 5190 
[  341.550000] wl1271: hw_value 38, flags 26
[  341.560000] wl1271: max_antenna_gain 0, max_power 20
[  341.560000] wl1271: beacon_found 0
[  341.570000] wl1271: band 1, center_freq 5200 
[  341.570000] wl1271: hw_value 40, flags 6
[  341.570000] wl1271: max_antenna_gain 0, max_power 20
[  341.580000] wl1271: beacon_found 0
[  341.580000] wl1271: band 1, center_freq 5210 
[  341.590000] wl1271: hw_value 42, flags 6
[  341.590000] wl1271: max_antenna_gain 0, max_power 20
[  341.600000] wl1271: beacon_found 0
[  341.600000] wl1271: band 1, center_freq 5220 
[  341.600000] wl1271: hw_value 44, flags 6
[  341.610000] wl1271: max_antenna_gain 0, max_power 20
[  341.610000] wl1271: beacon_found 0
[  341.620000] wl1271: band 1, center_freq 5230 
[  341.630000] wl1271: hw_value 46, flags 16
[  341.630000] wl1271: max_antenna_gain 0, max_power 20
[  341.630000] wl1271: beacon_found 0
[  341.640000] wl1271: band 1, center_freq 5240 
[  341.640000] wl1271: hw_value 48, flags 16
[  341.650000] wl1271: max_antenna_gain 0, max_power 20
[  341.650000] wl1271: beacon_found 0
[  341.650000] wl1271: band 1, center_freq 5745 
[  341.660000] wl1271: hw_value 149, flags 26
[  341.660000] wl1271: max_antenna_gain 0, max_power 20
[  341.670000] wl1271: beacon_found 0
[  341.670000] wl1271: band 1, center_freq 5765 
[  341.680000] wl1271: hw_value 153, flags 6
[  341.680000] wl1271: max_antenna_gain 0, max_power 20
[  341.680000] wl1271: beacon_found 0
[  341.690000] wl1271: band 1, center_freq 5785 
[  341.690000] wl1271: hw_value 157, flags 6
[  341.700000] wl1271: max_antenna_gain 0, max_power 20
[  341.700000] wl1271: beacon_found 0
[  341.700000] wl1271: band 1, center_freq 5805 
[  341.710000] wl1271: hw_value 161, flags 6
[  341.710000] wl1271: max_antenna_gain 0, max_power 20
[  341.720000] wl1271: beacon_found 0
[  341.720000] wl1271: band 1, center_freq 5825 
[  341.730000] wl1271: hw_value 165, flags 16
[  341.730000] wl1271: max_antenna_gain 0, max_power 20
[  341.730000] wl1271: beacon_found 0
[  341.740000] wl1271: cmd template_set 3
[  342.640000] wl1271: IRQ
[  342.640000] wl1271: IRQ work
[  342.650000] wl1271: intr: 0x4 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  342.660000] wl1271: WL1271_ACX_INTR_EVENT_A
[  342.660000] wl1271: EVENT on mbox 0
[  342.660000] wl1271: MBOX DUMP:
[  342.670000] wl1271:  vector: 0x400
[  342.670000] wl1271:  mask: 0xff9a1bfe
[  342.670000] wl1271: vector: 0x400
[  342.680000] wl1271: status: 0x4c
[  342.680000] wl1271: Scanning complete
[  342.680000] wl1271: intr: 0x0 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  342.690000] wl1271: mac80211 config ch 1 psm off power 20 in use changed 0x40
[  342.700000] wl1271: mac80211 bss info changed 0x4000
[  342.700000] wl1271: mac80211 config ch 1 psm off power 20 idle changed 0x100
[  342.710000] wl1271: flushing tx buffer: 0 0
[  342.720000] wl1271: cmd disconnect
[  342.720000] wl1271: IRQ
[  342.740000] wl1271: RX filters set: 
[  342.740000] wl1271:  - FIF_OTHER_BSS
[  342.740000] wl1271: acx rate policies
[  342.750000] wl1271: basic_rate: 0x1, full_rate: 0x1
[  342.750000] wl1271: cmd configure
[  342.760000] wl1271: acx keep alive config
[  342.760000] wl1271: cmd configure
[  342.760000] wl1271: IRQ work
[  342.770000] wl1271: elp work
[  342.770000] wl1271: intr: 0x8 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  342.770000] wl1271: WL1271_ACX_INTR_EVENT_B
[  342.770000] wl1271: EVENT on mbox 1
[  342.770000] wl1271: MBOX DUMP:
[  342.770000] wl1271:  vector: 0x8000
[  342.770000] wl1271:  mask: 0xff9a1bfe
[  342.770000] wl1271: vector: 0x8000
[  342.770000] wl1271: intr: 0x0 (fw_rx_counter = 0, drv_rx_counter = 0, tx_results_counter = 0)
[  342.780000] wl1271: chip to elp
[  342.790000] wl1271: elp work
wlan0     No scan results

over 14 years ago

0 Eyal a over 14 years ago

TI__Genius 9240 points

Hi,

Can you please provide more information on the board and 128x module that you are using? Also which link had you taken the source code from? on the release please indicate 2 components the Driver and the firmware since they have to match.

Regards,

Eyal

0 Austin Huang over 14 years ago in reply to Eyal a

Intellectual 490 points

Hi:

Sorry. My issue is "can't get any scan results".

I can't provide board information now. I got the code from http://linuxwireless.org/ .

what is meaning about " on the release please indicate 2 components the Driver and the firmware since they have to match."???

Austin Huang

0 Eyal a over 14 years ago in reply to Austin Huang

TI__Genius 9240 points

Hi,

Driver and firmware are taken from different git, and you one has to make sure that the firmware and the driver are for the same release. let me verify again on the releases.

Regards,

Eyal

0 Austin Huang over 14 years ago in reply to Eyal a

Intellectual 490 points

Hi Eyal:

Do you have any link about the driver and firmware mapping link table??

ex:

If my kernel is 2.6.38. How to get the same release firmware.bin for 2.6.38???

Austin

0 Eyal a over 14 years ago in reply to Austin Huang

TI__Genius 9240 points

Hi Austin,

not sure how to correlate them, however the firmware can be found in git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git

in addition it is placed in git://github.com/gxk/ti-utils.git

Regards,

Eyal

Wi-Fi

Wi-Fi forum

128X nlcp porting