Activating SP-9XSL-D Test Functions

Joshua Bain

I am using the (SP-9XSL-D, Tentative P/N : LBWA19XSLZ-TEMP), does anyone have any insight into putting this part into various test modes, such as Continuous Wave transmission?

over 14 years ago

0 Eyal a over 14 years ago

TI__Genius 9240 points

Hi Joshua,

what release are you using? is it WiLink6 M6 release?

in case it is then you may control the Murata module test modes by using the command line under PLT section. Please find information in the link.

General description of the BIT section is describes in link http://processors.wiki.ti.com/index.php/OMAP35x_Wireless_Connectivity_WL1271_Command_Line_Interface_(CLI)_User%27s_Guide#BIT_Menu

For example Tx continuous is described in link http://processors.wiki.ti.com/index.php/OMAP35x_Wireless_Connectivity_WL1271_Command_Line_Interface_(CLI)_User%27s_Guide#Continuous_TX

Regards,

Eyal

Wi-Fi

Wi-Fi forum

Activating SP-9XSL-D Test Functions