WL1835MOD: WL1835 qnx ims6 driver

Herve grange

Part Number: WL1835MOD
Other Parts Discussed in Thread: WL1835

Hello ,

Yes , we talk about wilink8 driver for WL1835MOD on QNX for imx6.

The driver was availlable in QNX7.0 , but seem not be done for QNX 7.1.

The physical interface use by the driver between imx6 and WL1835 is SDIO.

best regards

0 S over 1 year ago

Hi,

Blackberry/QNX integrates WiLink8 driver in QNX OS. Are you able to check with them and get a confirmation ?

Thanks

0 Herve grange over 1 year ago in reply to S

Hi,

In QNX 7.1 the driver for the wilink8 is not present.

It's was present in QNX 7.0.

Regards

0 S over 1 year ago in reply to Herve grange

QNX is more familiar with their OS versions. Can you pls check with them and get a confirmation .

0 Herve grange over 1 year ago in reply to S

Hi ,

Yes we had asked directly to QNX support , and the answer is that wilink8 driver is not supported in QNX7.1 for imx6 and is not in the roadmap.

Regards

0 S over 1 year ago in reply to Herve grange

Thanks for the update. We will check this on our side

Wi-Fi forum