This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WL1835MOD: Advertising mfg specific data

Part Number: WL1835MOD
Other Parts Discussed in Thread: WL1835


I am using Bluetopia 5.1 stack, currently the WiLink device would just be a non-connectable beacon. I need to advertise custom data. When I see the sniffer output of the beacon, I see 3 bytes of flags field as seen below in the ADV_IND packet. Is it mandatory to advertise this information. If not, I could use these 3 bytes as well for advertising my mfg specific data.