• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 207 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WL1835MOD: Determining the noise floor and configuring RX sensitivity.

Bala Naresh Nalamati
Prodigy 90 points
Part Number: WL1835MOD

Hi,

What would be the recommended practice to determine the noise floor and configuring the RX sensitivity in the .ini file.

Are we need to be use an external probe or there may be some method of reading out from wl18xx module ?

Please let us know the TI recommended practice on this.

Thanks,

Naresh