• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 274 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Regarding WL1271 Sleep mode

kai hu
Prodigy 90 points
Other Parts Discussed in Thread: WL1271

Hi,

How to make WL1271 enter sleep mode and quit sleep mode?

By default, these three values inside the tiwlan.ini are 

dot11PowerMode = 0

defaultPowerLevel = 0

PowerSavePowerLevel = 0

Does this mean the module already in sleep mode?

 

Thanks in advance!

  • 0
    TI__Genius 9240 points

    Hi Kai

    What exactly are you referring by sleep mode, is it suspend mode or low current consumption state while connected to the WiFi network?

    If it is low power state then with the parameters you mentioned the 1271 chip will go to low current consumption state (sleep) in case the Station has nothing to do for example it is not busy transmitting or receiving frames.

    Regards,

    Eyal