CC3120MOD: How to setup CC3XXXRADIOTEST for certification test

Yuto Kitamura

Part Number: CC3120MOD
Other Parts Discussed in Thread: CC3XXXRADIOTEST,

Dear team,

We would like to take certification test by using CC3XXXRADIOTEST and our board. We use Host MCU to connect CC3120MOD by SPI.

Q1: Can we use it by using USB-UART adopter between host MCU and PC?　
Q2: Do we need to disconnect SPI from Host MCU?

Thank you,
Yuto

7 months ago

0 Dylan Hubbard 7 months ago

TI__Mastermind 44775 points

Hi Yuto,

You should be able to find all the info needed in this guide.

0 Yuto Kitamura 7 months ago in reply to Dylan Hubbard

TI__Expert 5100 points

Hi Dylan,

We have already referred the guide but could not find that information. I will share the schematics internally, can you please check if it works properly?

Thank you.
Yuto

0 Dylan Hubbard 7 months ago in reply to Yuto Kitamura

TI__Mastermind 44775 points

Hey Yuto,

I see no issues with the SPI or UART connection in the schematic.

Wi-Fi

Wi-Fi forum

CC3120MOD: How to setup CC3XXXRADIOTEST for certification test