• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 480 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3301: Inquiry About Latest CC3301 Driver Package for RTOS

aaron wu
Prodigy 120 points
Part Number: CC3301


Dear Support Team,

I hope this message finds you well.

I am currently working on porting the CC3301 driver to an RTOS and would like to inquire about the location of the latest driver package. Previously, I downloaded a software package named cc33xx-mcu-plugin-0.5, which included the following note:

Please note that the versioning scheme was changed and from now contains 4 parts. The previous release was R1.3.

I am unsure where to obtain the latest version of the driver package. Could you please provide me with information or a link to download it?

Thank you for your assistance.

Best regards,

Aaron

  • 0
    TI__Genius 14761 points

    Hello Aaron,

    The RTOS SDK for the cc3301 has not been officially released, however, you can request access to the latest pre release package.

    https://www.ti.com/tool/CC33XX-SOFTWARE 

    You will need to press this request button.

    Best,

    Rogelio

  • 0 in reply to RogelioD
    Prodigy 120 points

    Hi Rogelio,

    Thank you very much for your prompt and detailed response.

    I have two additional questions that I would like to clarify:

    1. CC33XX MCU Plugin: I had previously downloaded a software package named cc33xx-mcu-plugin-0.5.zip, but I have since forgotten the source from which I downloaded it. Are you familiar with this package? Could you provide information on where I can download it again?

    2. Using CC2652 as a Host for CC3301: We are considering using the CC2652 as a host to drive WiFi functionality. Is this feasible with the current setup and available drivers? Any insights or recommendations regarding this configuration would be greatly appreciated.

    Thank you once again for your assistance.

    Best regards,

    Aaron