• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 80 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3300: Linux drive or example to setup STA/AP concurrent mode

Gibbs Shih
Intellectual 2350 points
Part Number: CC3300

Tool/software:

Hi, Expert

Because of reference this link, I think CC33xx should be support WiFi STA/AP "concurrent mode".

https://e2e.ti.com/support/wireless-connectivity/wi-fi-group/wifi/f/wi-fi-forum/1235241/cc3301-access-point-and-station-mode-concurrently?tisearch=e2e-sitesearch&keymatch=WiFi%252520concurrent#

Linux host is AM62x, do we have any setting example for STA/AP concurrent mode?

I only see dual STA example in CC3300 Linux user guide.

Many Thanks

Gibbs

  • +1
    TI__Mastermind 22860 points

    Hi Gibbs,

    Yes, CC33xx does support multirole mode. 

    There is nothing specific you have to do to enable STA/AP modes simultaneously. Simply run the "sta_start.sh" and then the "ap_start.sh" scripts. Because these scripts specify use of wlan0 (STA) and wlan1 (AP) interfaces, then there is no additional configuration necessary. STA/AP multirole works out of the box.