CC3000 EMK issue

Alberto Soattin

Hi Support,

after several good tests, I'm now not able to connect to the PC with CC3000EMK on MSP430-FRAM EVM.

In particular, now I’m not able to obtain the 6 LEDs on after both “First Time Config” and “Fixed SSID” setting procedures.

I only have ON the first 4 leds.

Any idea of this possible issue?

Thanks and regards,

Alberto

over 13 years ago

0 Gustavo L over 13 years ago

TI__Genius 9990 points

Alberto,

You are using version 0_5_26 of the installer correct? The issue can be because:

1) You must have a static IP of 192.168.1.129

2) Your firewall must be disabled

3) The GUI must be running and the computer must be connected to the same AP as the one the CC3000 is connected.

Regards,
Gustavo

0 Alberto Soattin over 13 years ago in reply to Gustavo L

TI__Genius 16905 points

Just verified that Symantec Endpoint Protection need to be disabled! Now it's running.

Thanks and regards,

Alberto

0 Gustavo L over 13 years ago in reply to Alberto Soattin

TI__Genius 9990 points

Alberto,

FYI this issue has been resolved in the new Sensor Application that will be released soon. There is no longer a need to disable the firewall in almost all cases.

Regards,
Gustavo

Wi-Fi

Wi-Fi forum

CC3000 EMK issue